The MK18 AR15 style Pistol is inspired by the original MK18, which has been extremely popular within the Law Enforcement and Special Operations communities. This firearm is classified as a Pistol and not a Short Barreled Rifle (NFA regulated items require ATF approval and a tax stamp).
The Daniel Defense MK18 Pistol For Sale features the picatinny quad rail Daniel Defense currently provides to USSOCOM and a 10.3 inch Cold Hammer Forged Barrel, the same length commonly used for CQB operations. The MK18 RISII features our patented 6-bolt Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM.
This pistol comes equipped with the SB Tactical SBA3 Pistol Stabilizing Brace with 5 positions of adjustability and integral, ambidextrous QD swivel attachment point.
The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This pistol comes equipped with the ergonomic Daniel Defense Pistol Grip with an integral trigger guard and soft touch overmolding.
Daniel Defense MK18 Pistol For Sale
Please check with your local, state and federal agencies regarding the legality of use of this product in your area.
MATERIALS & CONSTRUCTION
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- RECEIVER EXTENSION: AR Pistol Receiver Extension
- BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 10.3″ Government Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
- GAS SYSTEM: Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
Daniel Defense MK18 Pistol Review
- MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile, MP Tested, Chrome Lined, Properly Staked Gas Key
- BUFFER: H Buffer
- HANDGUARD: Daniel Defense RIS II MK18, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized, Black
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
- BRACE: SB Tactical SBA3 Pistol Stabilizing Brace
- PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
- RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
- Made in the USA!
FFL REQUIRED
LARGER PHOTO |
|
|
DANIEL DEFENSE MK18 PISTOL 10.3″ – FDE
9Reviews
|
|
|
|
Stock Status:(Out of Stock)
Product Code: 02-088-06030
|
|
EMAIL ME WHEN BACK IN STOCK!
|
|
|
|
|
|
|
|
|
|
|
The MK18 AR15 style Pistol is inspired by the original MK18, which has been extremely popular within the Law Enforcement and Special Operations communities. This firearm is classified as a Pistol and not a Short Barreled Rifle (NFA regulated items require ATF approval and a tax stamp). The MK18 Pistol features the picatinny quad rail Daniel Defense currently provides to USSOCOM and a 10.3 inch Cold Hammer Forged Barrel, the same length commonly used for CQB operations. The MK18 RISII features our patented 6-bolt Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM. This pistol comes equipped with the SB Tactical SBA3 Pistol Stabilizing Brace with 5 positions of adjustability and integral, ambidextrous QD swivel attachment point. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This pistol comes equipped with the ergonomic Daniel Defense Pistol Grip with an integral trigger guard and soft touch overmolding.
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- RECEIVER EXTENSION: AR Pistol Receiver Extension
- BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 10.3″ Government Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
- GAS SYSTEM: Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
- MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile, MP Tested, Chrome Lined, Properly Staked Gas Key
- BUFFER: H Buffer
- HANDGUARD: Daniel Defense RIS II MK18, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized, Black
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
- BRACE: SB Tactical SBA3 Pistol Stabilizing Brace
- PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
- RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
- Made in the USA!
* All NFA Regulations apply. Each state’s laws dictate what can or cannot be possessed in its own state. Some county’s within each state are different as well. Please contact your local ATF Field office with any ATF questions or concerns you may have. Freedom Trading Co reserves the right to use discretion when selling to each individual state.
TEST FIRE DISCLAIMER:
Many of the manufacturers whose products we carry will have a standardized test fire protocol for not only their complete firearms as well as parts such as upper receiver groups and bolt carriers. Because of this test fire protocol, some items will show evidence of the test fire process such as brass and carbon residue on internals or brass markings on case deflectors.
|
|
|
Reviews
There are no reviews yet.